P0B5B
Hybrid/EV Battery Voltage Sense G Circuit Low
When P0B5B appears, the battery controller has seen cell sense channel G at a level no usable cell would show, and it shuts down or restricts electric operation to stay on the safe side. GM documents the trigger for its lithium-ion systems as cell voltage G at or below 0.2 V for 1.4 s in a 2 s window, Type A, with the test held off while communication, open line or balancing faults are active. On the 2012 two-mode hybrids channel G is block 7, and the code needs blocks 7 and 8 together under 2 V in 15 of 20 samples, Type B. Sense wiring, connector pins and the monitoring input deserve attention before the cells, which have their own cell voltage codes.
Possible causes
- Channel G sense line shorted to a neighbouring line high
- Damaged or backed-out pin in the monitoring connector medium
- Failed measuring input on the monitoring module medium
Symptoms
- Hybrid system warning and MIL
- Electric drive disabled or restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B5B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.