P0B54
Hybrid/EV Battery Voltage Sense F Circuit
Ford's 2024 special service message for the 2023 Mustang Mach-E and E-Transit is the most instructive case for P0B54: vehicles built up to 9 December 2023 could store this and the other open-line codes from P0B3B to P0B5E, show the wrench light, refuse to start or charge, or display Stop Safely Now, and the cause was an intermittent BECM flexible printed circuit cable rather than the cells. The 2019-2020 Fusion PHEV shows the same code with a battery replacement as remedy. P0B54 itself means sense channel F is electrically open; GM confirms this with neighbouring cells at least 1.3 V apart, a balanced cell under 36 mV or a splice above 0.1 V for 0.6 s, Type A.
Possible causes
- Intermittent BECM flexible printed circuit cable (Ford Mach-E, E-Transit built to Dec 2023) high
- Open channel F tap or splice medium
- Internal traction battery failure (Ford Fusion PHEV) low
Symptoms
- Powertrain malfunction (wrench) indicator on
- No start or no charging
- Stop Safely Now message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B54
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.