P0B51
Hybrid/EV Battery Voltage Sense E Circuit Low
P0B51 tells that cell sense channel E reads near zero. GM's battery energy control module only runs this check under clear conditions: the module is in run, crank or accessory mode, the second protection self-test is not running, and no slave communication, open sense line, balancing or internal performance fault is active. Then a reading of 0.2 V or less for 1.4 s in a 2 s window sets the code, Type A, one trip. The order matters for diagnosis: an open sense line or a lost slave board would be reported first by their own codes. On the 2012 two-mode hybrids channel E is block 5, set when blocks 5 and 6 both drop below 2 V, Type B. Electric operation is then restricted.
Possible causes
- Channel E sense line shorted to its neighbour high
- Faulty input on the cell monitoring slave board medium
- Pin backed out of the monitoring harness connector low
Symptoms
- MIL and hybrid system warning
- Electric-only driving unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B51
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.