P0B50
Hybrid/EV Battery Voltage Sense E Circuit Range/Performance
On the 2020 Chrysler Pacifica plug-in hybrid P0B50 is called Voltage Sense 5 Circuit Performance and rarely comes alone: the FCA bulletin lists it with the other sense channels, contactor stuck codes, a long precharge time and wake-up circuit faults, all cured by updating the battery pack control module. Some owners also notice that scheduled charging fails because the pack does not wake up. GM defines the check precisely: channel E must change in step with the average cell voltage, and a stuck reading in 35 of 40 samples sets the code, Type A; the 2012 two-mode hybrids instead flag block 5 when 20 times its value differs from the pack voltage by over 70 V. Open, low and high faults are separate codes.
Possible causes
- Battery pack control module software, fixed by reflash (Chrysler Pacifica PHEV) high
- Channel E reading frozen in the measuring chip medium
- Block voltage measurement drifting from pack voltage (GM two-mode) low
Symptoms
- MIL on
- Scheduled charging does not start
- Premature oil change or fuel refresh message (Pacifica)
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B50
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.