P0B4C
Hybrid/EV Battery Voltage Sense D Circuit Low
From the driver's seat P0B4C looks like a battery problem: the hybrid warning comes on and electric power is cut back. Technically it is a measuring fault on cell channel D, whose reading has fallen below what even a deeply discharged cell would show. GM's battery energy control module uses 0.2 V or less, held for 1.4 s within 2 s, Type A, and skips the test while open sense line or communication faults are active. On the 2012 two-mode full-size hybrids, channel D is block 4, and the code needs blocks 4 and 5 both below 2 V in 15 of 20 samples, Type B. A genuinely weak cell produces separate cell voltage codes, so P0B4C points to wiring or the monitoring module.
Possible causes
- Short between channel D sense line and a neighbouring line high
- Defective input on the cell monitoring module medium
- Corroded tap shared by blocks 4 and 5 (GM two-mode) low
Symptoms
- Hybrid warning message and MIL
- Electric power and regeneration cut back
- Engine runs more often than usual
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B4C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.