OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B4A

Hybrid/EV Battery Voltage Sense D Circuit

P0B4A is the open-circuit code of cell sense channel D, the fourth measuring channel of the battery monitoring electronics. GM checks it in the battery energy control module with the same open sense line logic as the other channels: a gap of 1.3 V or more between adjacent cells, under 36 mV on a cell being balanced, or splice voltages above 0.1 V or 0.5 V at a bus bar, for 0.6 s, Type A. For diagnosis, the pattern matters: if P0B4A stands alone, inspect the channel D tap and its connector; if Ford's whole open-line group from P0B3B upwards is set, as on the 2019-2020 Fusion PHEV or the 2023 Mach-E and E-Transit, a common cause such as the BECM flex cable or the battery itself is more likely.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 4A

Possible causes

  • Open channel D sense tap or connector (code set alone) high
  • Faulty BECM flexible printed circuit affecting several channels (Ford Mach-E, E-Transit) medium
  • Internal traction battery fault (Ford Fusion PHEV) medium

Symptoms

  • No start or vehicle will not go into ready mode
  • Charging not possible
  • Several sense channel codes stored together

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B4A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication