P0B49
Hybrid/EV Battery Voltage Sense C Circuit Intermittent/Erratic
P0B49 is reserved for a channel C signal that jumps or drops out briefly instead of failing for good. No manufacturer documents this code publicly; GM, which uses the other four channel C codes, has no erratic test for it in its published tables. A technician would start from the freeze frame and log cell voltage C next to its neighbours while flexing the module harness, because a loose crimp or a cracked solder joint on the monitoring board shows up as spikes that a permanent test misses. CARB requires battery voltage sensors of the energy storage system to be monitored like any input and faults to be tied to the smallest replaceable unit. Warnings may come and go.
Possible causes
- Loose crimp or connector on the channel C sense line high
- Cracked solder joint on the cell monitoring board medium
- Electrical noise from the inverter coupling into the sense line low
Symptoms
- Warning light that appears and disappears
- Occasional short loss of electric drive power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B49
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.