P0B48
Hybrid/EV Battery Voltage Sense C Circuit High
No healthy lithium-ion cell reaches 4.8 V, which is why GM's battery energy control module treats a channel C reading of 4.8 V or more for 1.4 s within a 2 s window as a sensing fault and stores P0B48, Type A, one trip. On the 2012 two-mode full-size hybrids the threshold is scaled to a nickel-metal hydride block: block 3 above 23 V in 15 of 20 samples, Type B, two trips. Because the controller cannot trust the reading, it usually narrows the allowed charge and discharge power to protect the cells. For the driver this means less electric assist and possibly no plug-in charging. A cell that is really overcharged triggers separate cell voltage codes, not this one.
Possible causes
- Channel C sense line touching a tap of higher potential high
- Failed measuring input or reference in the monitoring electronics medium
- Monitoring software fault, check for controller updates low
Symptoms
- MIL and hybrid or EV system warning
- Reduced charge and discharge power
- Plug-in charging refused
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B48
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.