P0B47
Hybrid/EV Battery Voltage Sense C Circuit Low
P0B47 is stored when channel C delivers a voltage too low to come from a working cell or block, so the controller blames the measurement rather than the battery. GM documents two implementations. On lithium-ion packs the battery energy control module sets it at 0.2 V or less for 1.4 s within 2 s, Type A, one trip, unless an open sense line, communication or balancing fault is already active. On the 2012 Tahoe, Yukon, Escalade, Silverado and Sierra two-mode hybrids channel C is nickel-metal hydride block 3; there block 3 and block 4 must both read under 2 V in 15 of 20 samples, Type B, two trips. Shorted sense lines or a failed measuring input are the usual suspects.
Possible causes
- Sense lines of channel C shorted to each other or to a neighbouring tap high
- Failed measuring input in the battery monitoring module medium
- Loose or corroded block connector shared by blocks 3 and 4 (GM two-mode) medium
Symptoms
- Hybrid system warning and MIL
- Electric drive or engine start-stop no longer available
- Battery power limited, sluggish acceleration
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B47
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.