P0B46
Hybrid/EV Battery Voltage Sense C Circuit Range/Performance
With P0B46 the channel C wiring is intact; the value on it looks plausible but no longer behaves like a real cell. GM's 2019 tables run the test in Hybrid Powertrain Control Processor 2: whenever the average cell voltage trends by at least 0.005 V in one direction, channel C has to follow; if it stays frozen in 35 of 40 samples at 100 ms, the code sets, Type A. The 2016 Chevrolet Volt uses a window of 7 out of 8 seconds instead. Chrysler calls the code Voltage Sense 3 Circuit Performance on the 2020 Pacifica plug-in hybrid and cures it by reflashing the battery pack control module. So before opening the battery, check the controller software level.
Possible causes
- Battery controller software misjudging the channel, fixed by reflash (Chrysler Pacifica PHEV) high
- Measuring chip input for channel C stuck at a constant value medium
- High-resistance cell tap damping the channel C signal low
Symptoms
- MIL on without noticeable driving fault
- Reduced electric power or hybrid assist
- Contactor or precharge codes stored at the same time (Pacifica)
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B46
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.