P0B45
Hybrid/EV Battery Voltage Sense C Circuit
Voltage sense C is the third cell or cell-group measuring channel of the battery monitoring electronics, not a pack voltage input like P0ABA. P0B45 reports an electrical break in that channel. GM's battery energy control module sets it when its open sense line test fails for 0.6 s: adjacent cell readings at least 1.3 V apart, a cell below 36 mV while its balancing switch is on, or a splice above 0.1 V (bus bar splice 0.5 V); Type A, one trip. Ford lists P0B45 with the other open-line codes on the 2019-2020 Fusion plug-in hybrid, fixed by a new traction battery, and on the 2023 Mustang Mach-E and E-Transit, where an intermittent BECM flexible printed circuit is blamed. Expect no start or no charging.
Possible causes
- Open cell sense tap, splice or bus bar connection on channel C high
- Intermittent flexible printed circuit between cells and battery controller (Ford Mach-E, E-Transit) medium
- Internal traction battery failure requiring pack replacement (Ford Fusion PHEV) medium
Symptoms
- Vehicle does not start or does not become ready to drive
- High-voltage battery no longer charges
- Powertrain warning (wrench) and Stop Safely Now message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B45
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.