P0B42
Hybrid/EV Battery Voltage Sense B Circuit Low
P0B42 sets when cell voltage channel B reads implausibly low, below what any usable cell would show. GM's battery energy control module sets it at 0.2 V or less for 1.4 s within a 2 s window, Type A, one trip, and only when no open sense line, slave communication or balancing fault is present. FCA uses P0B42 as Voltage Sense 2 Circuit Low on the 2022 Grand Wagoneer and Wagoneer with the 5.7 L eTorque mild hybrid; its bulletin calls the MIL false, mentions inoperative start-stop and a car that seems to run on fuel only, and prescribes a battery pack control module update. Cells that are actually weak set separate cell voltage codes. High and range faults are P0B43 and P0B41.
Possible causes
- Battery pack control module software causing a false MIL (FCA eTorque) high
- Sense line shorted to the adjacent line or to the cell negative medium
- Measurement input of the cell monitoring chip failed low
Symptoms
- MIL on
- Start-stop inoperative
- Vehicle behaves as if running on the engine only
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B42
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.