OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B41

Hybrid/EV Battery Voltage Sense B Circuit Range/Performance

P0B41 reports that cell voltage channel B gives values inside the normal range that fail a plausibility check against the other cells. In GM's 2019 tables Hybrid Powertrain Control Processor 2 compares sample-to-sample changes: if the average cell voltage trends by at least 0.005 V while channel B stays unchanged, a failure is counted, and 35 of 40 samples at 100 ms set the code, Type A, one trip, with system voltage above 10.2 V. FCA calls it Voltage Sense 2 Circuit Performance on the Pacifica plug-in hybrid and lists it with P0B3C and further channels in battery pack control module update bulletins. Circuit, low, high and erratic faults of channel B are P0B40, P0B42, P0B43 and P0B44.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 41

Possible causes

  • Battery controller software, fixed by reprogramming (FCA Pacifica) high
  • Cell voltage measurement channel frozen inside the monitoring electronics medium
  • High resistance in the cell sense line or its connection medium
  • Cell monitoring board failure inside the pack low

Symptoms

  • MIL on, often with several voltage sense codes
  • Electric drive reduced or unavailable
  • Contactor related codes stored at the same time

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B41

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication