P0B3F
Hybrid/EV Battery Voltage Sense A Circuit Intermittent/Erratic
P0B3F is reserved for a cell voltage channel A that jumps or drops out briefly instead of failing steadily. No manufacturer documents P0B3F publicly. GM's 2019 tables show how the siblings on the same channel work: an open line test (P0B3B), a stuck-in-range test against the other cells (P0B3C) and fixed limits of 0.2 V and 4.8 V (P0B3D, P0B3E); an erratic test would watch for implausible jumps between samples. CARB requires battery voltage sensors of the energy storage system to be monitored as input components, with fault codes pinpointing the smallest replaceable unit. Loose connections at the cell taps or the monitoring board are the usual suspects. Hybrid power may be limited.
Possible causes
- Loose or cracked cell tap connection high
- Fretting or vibration damage at the monitoring board connector medium
- Electrical noise from inverter or motor coupling into the sense lines medium
Symptoms
- MIL or hybrid warning that comes and goes
- Occasional loss of electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B3F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.