P0B3E
Hybrid/EV Battery Voltage Sense A Circuit High
P0B3E sets when cell voltage channel A reads above any value a healthy lithium-ion cell reaches, so the reading is treated as a sensing fault. GM sets it in the battery energy control module when cell voltage A is 4.8 V or more for 1.4 s within a 2 s window, Type A, one trip. FCA uses the code on the 2021 Jeep Wrangler 4xe as Voltage Sense 1 Circuit High and on the 2019 Ram 1500 eTorque as Voltage Sense A Circuit High; in both cases a battery pack control module update removes a false MIL. A truly overcharged cell sets separate cell voltage high codes such as P0DE7 instead. Low, range and open faults are P0B3D, P0B3C and P0B3B. The car limits battery use.
Possible causes
- Battery pack control module software causing a false MIL (FCA) high
- Open sense line letting the input float high medium
- Measurement input of the cell monitoring chip failed low
Symptoms
- MIL on, possibly without noticeable drivability change
- Electric drive or start-stop disabled
- Charging limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B3E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.