P0B3D
Hybrid/EV Battery Voltage Sense A Circuit Low
P0B3D sets when cell voltage channel A reads below the lowest value a real cell can have, which points to the measurement rather than the cell. GM sets it in the battery energy control module when cell voltage A is 0.2 V or less for 1.4 s within a 2 s window, Type A, one trip, provided no open sense line, communication or balancing fault is active. FCA lists P0B3D as Hybrid Battery Voltage Sense A Circuit Low on the 2019 Ram 1500 with eTorque mild hybrid, next to the pack-level code P0ABA, and cures it with a battery pack control module update. A genuinely low cell is reported with separate cell voltage codes. Expect reduced or blocked hybrid assist.
Possible causes
- Battery pack control module software, fixed by update (Ram eTorque) high
- Sense line shorted to the adjacent line or to the cell negative medium
- Measurement input of the cell monitoring chip failed low
Symptoms
- MIL on
- Start-stop and electric assist unavailable
- Hybrid battery power limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B3D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.