OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B3C

Hybrid/EV Battery Voltage Sense A Circuit Range/Performance

P0B3C flags a cell voltage channel A that reads plausible values but does not follow the other cells. GM runs this check in Hybrid Powertrain Control Processor 2 as a stuck-in-range test: while the average cell voltage moves by at least 0.005 V in one direction between samples, channel A must move as well; 35 failures in 40 samples at 100 ms set the code, Type A, one trip. FCA names the code Voltage Sense 1 Circuit Performance on the Chrysler Pacifica plug-in hybrid and fixes it, together with P0B41 and further channels, by reprogramming the battery pack control module. Circuit, low, high and erratic faults have their own codes. The system limits battery power or shuts down hybrid operation.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 3C

Possible causes

  • Battery controller software, fixed by reprogramming (FCA Pacifica) high
  • Cell voltage measurement channel frozen inside the monitoring electronics medium
  • High resistance in the cell sense line or its connection medium
  • Cell monitoring board failure inside the pack low

Symptoms

  • MIL on, often with several voltage sense codes
  • Reduced electric range or no electric drive
  • Contactor related codes stored at the same time

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B3C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication