OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B3A

Motor Electronics Coolant Pump B Control Circuit High

P0B3A sets when the control signal of motor electronics coolant pump B stays higher than expected, typically a short to battery voltage on the command line or, with some driver designs, an open pump input that floats high. The module then cannot switch the pump as requested. No manufacturer documents P0B3A publicly. As reference points, FCA has a pump B on its 4xe models with the performance code P0C74, and Ford lists the pump A high code P0A07 among PCM codes fixed by a battery controller update on the 2020 Explorer and Aviator hybrids. CARB requires inverter thermal management outputs to be monitored. Open and low faults are P0B38 and P0B39. Overheating protection may reduce power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 3A

Possible causes

  • Control wire shorted to battery voltage high
  • Pump control input open so the line floats high medium
  • Controller software misjudging the circuit, fixed by update low
  • Driver stage in the controlling module faulty low

Symptoms

  • MIL and hybrid or coolant warning
  • Pump cannot be switched off or on as commanded
  • Reduced electric power when the inverter heats up

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0B3A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication