OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B38

Motor Electronics Coolant Pump B Control Circuit/Open

Hybrid and electric drives cool the inverter and motor electronics with electric coolant pumps; J2012 numbers them A, B and C. P0B38 sets when the controller detects an open or general fault in the control line of pump B, typically by checking the driver output for missing load current. No manufacturer documents P0B38 publicly. FCA uses a pump B on the Jeep Compass and Renegade 4xe, where bulletins name its performance code P0C74, and Mercedes uses the pump A code P0A05 for an open control circuit of the low-temperature circuit pump on M264 engines. CARB requires output components of inverter thermal management to be monitored. Expect a coolant or hybrid warning and power reduction if electronics overheat.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 38

Possible causes

  • Pump connector loose, corroded or terminal pushed out high
  • Open control wire between controller and pump medium
  • Pump electronics or motor failed open medium
  • Driver stage in the controlling module faulty low

Symptoms

  • Hybrid system or coolant warning, MIL on
  • Reduced electric drive power when electronics get hot
  • Pump not running audibly after switch-on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0B38

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication