OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B37

High Voltage Service Disconnect Open

P0B37 means the controller sees the service disconnect as open, either because the plug is really removed or because its detection loop is broken. Ford uses the code in the battery energy control module of the 2013-2016 C-Max Energi: bulletins SSM 46108 and TSB 17-0015 describe intermittent stalls or no crank with a Stop Safely Now message and MIL, stored with U3012 and, in another module, the interlock code P0A0A. The cause was an intermittent short to ground in the low-voltage interlock wiring, found by inspecting the harness for chafing. P0B33 to P0B36 cover circuit, performance, low and high faults. For the driver: the car shuts down or will not start.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 37

Possible causes

  • Low-voltage interlock wiring chafed with intermittent short to ground (Ford C-Max) high
  • Service disconnect plug removed, loose or not locked medium
  • Open terminal in the plug base or interlock connector medium
  • Battery energy control module fault low

Symptoms

  • Intermittent stall or no crank
  • Stop Safely Now message and MIL
  • High-voltage interlock code stored in another module

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B37

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication