P0B34
High Voltage Service Disconnect Circuit Performance
P0B34 covers a plausibility fault of the service disconnect detection: the signal is electrically within limits but does not match what the controller expects, for example a plug reported as removed while the high-voltage bus still shows voltage, or a state that changes without a matching event. Audi lists P0B3400 in the controller at address 008C of the 2025 Q5 e-hybrid, together with U029A00 and U059B00, and asks technicians to log the case in its pending service database; no threshold is published. CARB requires hybrid components to be checked for rationality as input devices. Pure circuit, low, high and open faults are P0B33, P0B35, P0B36 and P0B37. The car may refuse ready mode or charging.
Possible causes
- Battery controller software fault (Audi case under investigation) medium
- Loose plug or worn contacts giving an implausible detection state medium
- Increased resistance in the detection loop medium
- Communication fault between battery controller and other modules low
Symptoms
- Electrical system or high-voltage warning
- No ready mode or charging interrupted
- Related network codes stored at the same time
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B34
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.