P0B33
High Voltage Service Disconnect Circuit
The high-voltage service disconnect is the removable plug, usually fused, that splits the traction battery for safe servicing. A low-voltage detection loop runs through the plug, and the battery controller reads it to know whether the plug is seated; patents from Ford and Lear describe this loop, which opens before the main contacts part. P0B33 is the general circuit code for this detection input. No manufacturer documents P0B33 publicly. CARB requires such hybrid components to be monitored like any input. Performance, low, high and open have their own codes, P0B34 to P0B37; the separate high-voltage interlock loop uses P0A0A ff. Expect contactors to stay open: no ready mode, no charging.
Possible causes
- Service disconnect plug not fully seated or locked after service high
- Chafed, open or shorted detection loop wiring between plug base and battery controller medium
- Corroded or spread terminals in the plug or its base medium
- Battery controller input fault low
Symptoms
- Vehicle does not enter ready mode or will not start
- High-voltage system warning and MIL on
- Charging not possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B33
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.