P0B32
Hybrid/EV Battery D Voltage High
P0B32 sets when the voltage of hybrid/EV battery D goes above its permitted maximum. It is the high counterpart of P0B31; P0B30 covers unstable readings and P0B2F the general fault. No manufacturer documents P0B32 publicly; Bentley's P0B26 for battery A, cured by replacing the 48 V super capacitor, shows the same fault type on another unit. GM's analogous whole-pack monitor is P0ABD (above 479 V, Type A, MIL at once). CARB requires hybrid storage voltage sensors and cells to be monitored and codes to identify the replaceable unit. Causes are an overcharged cell group when balancing fails, a defective module or a measuring error. Charging and recuperation are cut back, and the contactors may open to protect the pack.
Possible causes
- Cell group in battery D charged too high, balancing ineffective medium
- Defective module in battery D medium
- Voltage measurement fault in the controller or sense leads low
Symptoms
- Hybrid/EV system or high-voltage battery warning on
- MIL on
- Charging or recuperation restricted
- Battery power limited, less electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B32
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.