P0B31
Hybrid/EV Battery D Voltage Low
P0B31 is stored when the voltage of hybrid/EV battery D stays below the expected range. High voltage of the same unit sets P0B32, fluctuation P0B30 and an unspecified deviation P0B2F. No manufacturer publishes a definition of P0B31; Bentley's P0B25 for battery A is the closest documented example, with the energy store replaced once the cell spread reaches 0.5 V. GM uses P0ABC for an undervoltage of the whole pack (below 24 V). CARB asks for monitoring of cells and voltage sensors in hybrid storage and for fault codes that single out the replaceable unit. Typical is a module in unit D that has aged faster or self-discharged during standstill. Discharge power and electric range drop, and the controller may stop electric driving.
Possible causes
- Aged cells with lost capacity in battery D high
- Deep discharge or self-discharge after standstill medium
- Voltage measurement fault in the controller or sense leads low
Symptoms
- Hybrid/EV system or high-voltage battery warning on
- MIL on
- Battery power limited, less electric drive or assist
- Reduced electric range
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B31
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.