OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B30

Hybrid/EV Battery D Voltage Unstable

P0B30 reports an unstable voltage of hybrid/EV battery D: the measured value fluctuates beyond the limit the controller allows. It differs from P0B31 and P0B32, which stand for a lasting low or high voltage, and from the general fault P0B2F. No manufacturer documents P0B30 publicly. The sibling codes for batteries A and B show the typical background: Stellantis and Ford corrected P0B24 and P0B28 by updating the battery controller software, and Jeep even blocks starting after 49 days with P0B28. CARB requires the hybrid storage voltage sensors to be monitored. Apart from software, poor contact at busbars or sense terminals and cells with high internal resistance make the reading of unit D jump.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 30

Possible causes

  • Loose busbar, terminal or sense contact in battery D medium
  • Battery controller software (pattern known from P0B24/P0B28) medium
  • Cell with rising internal resistance in battery D low

Symptoms

  • Hybrid/EV system or high-voltage battery warning on
  • MIL on
  • Warning comes and goes, fault often stored as intermittent
  • Battery power limited, less electric drive or assist

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B30

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication