OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B2F

Hybrid/EV Battery D Voltage

P0B2F is the general voltage fault of hybrid/EV battery D, the fourth and last sub-battery in this code family. The controller reports with it that the voltage of unit D is implausible, without specifying unstable (P0B30), low (P0B31) or high (P0B32). Only packs that the manufacturer splits into four separately monitored units can set it, and no manufacturer documents P0B2F publicly. For orientation, GM checks the whole pack with P0ABB to P0ABD, including a comparison of the pack voltage with the sum of all cells. CARB requires voltage sensors and cells of hybrid storage systems to be monitored, with codes pointing to the smallest replaceable unit. The driver sees a hybrid or battery warning and reduced power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 2F

Possible causes

  • Weak or failing cells or module in battery D medium
  • Fault in the voltage sense leads or connectors of battery D medium
  • Battery controller software or internal measurement fault low

Symptoms

  • Hybrid/EV system or high-voltage battery warning on
  • MIL on
  • Battery power limited, less electric drive or assist
  • Charging or recuperation restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B2F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication