P0B2E
Hybrid/EV Battery C Voltage High
P0B2E is set when the voltage of hybrid/EV battery C exceeds its upper limit. It pairs with P0B2D for undervoltage; P0B2C covers unstable readings and P0B2B the general fault. No manufacturer publishes a description of P0B2E. GM's comparable monitor for the complete pack is P0ABD, which fails above 479 V and is Type A, so the MIL comes on at once. CARB requires monitoring of hybrid battery voltage sensors and cells and dedicated codes for the replaceable unit. An overvoltage reading usually comes from a cell group that ended up overcharged because balancing failed, or from a drifting measurement channel. The controller then blocks or reduces charging and regenerative braking; plugging in may be refused.
Possible causes
- Cell group in battery C charged too high, balancing ineffective medium
- Drifting voltage measurement channel or sense lead fault medium
- Battery controller software fault low
Symptoms
- Hybrid/EV system or high-voltage battery warning on
- MIL on
- Charging or recuperation restricted
- External charging refused
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B2E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.