OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B2D

Hybrid/EV Battery C Voltage Low

P0B2D means the voltage of hybrid/EV battery C is too low compared with what the controller expects. High readings of the same unit are P0B2E, fluctuating ones P0B2C. No manufacturer documents P0B2D publicly; the nearest published case is Bentley's P0B25 for battery A, where a 0.5 V spread between highest and lowest cell points to a defective energy store. GM's corresponding whole-pack check is P0ABC (pack below 24 V). CARB requires that cells and voltage sensors of hybrid storage are monitored and that faults identify the smallest replaceable unit. A worn or deeply discharged module in unit C is the most likely reason. The controller lowers discharge power, so acceleration in electric mode suffers and the engine may run more often.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 2D

Possible causes

  • Aged cells with lost capacity in battery C high
  • Deep discharge or self-discharge after standstill medium
  • Voltage measurement fault in the controller or sense leads low

Symptoms

  • Hybrid/EV system or high-voltage battery warning on
  • MIL on
  • Battery power limited, less electric drive or assist
  • Combustion engine runs more often (hybrid)

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B2D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication