P0B2C
Hybrid/EV Battery C Voltage Unstable
P0B2C indicates that the voltage of hybrid/EV battery C is unstable, meaning it changes faster or further than plausible for the current load, while a steady deviation would set P0B2D or P0B2E. No manufacturer documents P0B2C publicly. The pattern is known from the A and B siblings: on the Jeep Wrangler 4xe and Grand Cherokee 4xe, P0B24 and P0B28 were cured with battery controller software, and Ford fixed P0B24 on the Mach-E the same way. CARB requires the voltage sensors of the hybrid storage to be monitored for circuit and rationality faults. Physically, a loose busbar screw, a corroded sense terminal or a cell with high internal resistance can make the voltage of unit C jump, so the warning often comes and goes.
Possible causes
- Loose busbar, terminal or sense contact in battery C medium
- Battery controller software (pattern known from P0B24/P0B28) medium
- Cell with rising internal resistance in battery C low
Symptoms
- Hybrid/EV system or high-voltage battery warning on
- MIL on
- Warning comes and goes, fault often stored as intermittent
- Battery power limited, less electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B2C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.