P0B29
Hybrid/EV Battery B Voltage Low
P0B29 sets when the voltage of hybrid/EV battery B stays below the range the controller expects for the present state of charge and load. It is the low counterpart to P0B2A; fluctuating readings belong to P0B28 and the general fault to P0B27. No manufacturer publishes a definition of P0B29; Jeep 4xe bulletins confirm the use of a separately monitored battery B only through P0B28. GM handles the analogous whole-pack undervoltage with P0ABC (pack voltage below 24 V). CARB requires battery voltage sensors and cells to be monitored and the fault to be narrowed to the smallest replaceable unit. Weak or deeply discharged cells in that unit are the usual reason, so the controller cuts discharge power and may block driving in EV mode.
Possible causes
- Aged cells with lost capacity in battery B high
- Deep discharge or self-discharge after standstill medium
- Voltage measurement fault in the controller or sense leads low
Symptoms
- Hybrid/EV system or high-voltage battery warning on
- MIL on
- Battery power limited, less electric drive or assist
- Electric-only driving unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B29
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.