P0B27
Hybrid/EV Battery B Voltage
P0B27 is the general voltage fault of hybrid/EV battery B, the second separately monitored sub-battery or energy store. It covers a voltage that does not match expectation without saying whether it is unstable (P0B28), too low (P0B29) or too high (P0B2A). That battery B exists in production systems is shown by Stellantis, whose Jeep Wrangler 4xe bulletin lists P0B28; P0B27 itself is not documented publicly by any manufacturer. GM's analogous monitors of the whole pack are P0ABB to P0ABD, for example a pack reading more than 12 V away from the sum of the cells. CARB requires the voltage sensors and cells of hybrid storage systems to be monitored. The driver gets a hybrid warning and reduced battery power.
Possible causes
- Weak or failing cells or module in battery B medium
- Fault in the voltage sense leads or connectors of battery B medium
- Battery controller software or internal measurement fault low
Symptoms
- Hybrid/EV system or high-voltage battery warning on
- MIL on
- Battery power limited, less electric drive or assist
- Charging or recuperation restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B27
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.