P0B25
Hybrid/EV Battery A Voltage Low
P0B25 sets when the voltage of hybrid/EV battery A drops below the window the controller expects. Bentley uses it in two different systems. In the 48 V Bentley Dynamic Ride anti-roll system it is stored in address 0021 (battery energy control module 2); if the highest and lowest cell readings differ by 0.5 V or more, an internal fault of the super capacitor is assumed and it is replaced. On the Bentayga and Flying Spur Hybrid the code appears in 008C, the high-voltage battery manager, with MIL and red battery warning, and the workshop must involve Bentley product support. GM checks pack undervoltage analogously with P0ABC (below 24 V). Unstable and high readings are P0B24 and P0B26. The driver loses roll control or battery power.
Possible causes
- Internal fault of the energy store, e.g. Bentley 48 V super capacitor high
- Aged or unbalanced cells pulling the unit voltage down medium
- Deep discharge after long standstill medium
- Voltage measurement fault in the controller or sense leads low
Symptoms
- Bentley Dynamic Ride fault warning, roll control inactive
- MIL on
- Hybrid/EV system or high-voltage battery warning on
- Battery power limited, less electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B25
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.