P0B24
Hybrid/EV Battery A Voltage Unstable
P0B24 reports that the voltage of hybrid/EV battery A is unstable: it swings or jumps more than the battery controller accepts instead of staying steadily too low or too high (P0B25, P0B26). Stellantis lists P0B24-00 with MIL on the Jeep Wrangler 4xe and Grand Cherokee 4xe, together with pack voltage variation, cell balancing and state-of-health codes; the cure is new software for the battery pack control module or, on the 2025 Wrangler, for the hybrid control processor. Some of these Jeeps would not start or reported low 12 V batteries. Ford names P0B24 in the BECM of the 2025 Mustang Mach-E Extended Range, shown with the wrench lamp and fixed by reprogramming. Hardware causes are loose busbar or sense contacts.
Possible causes
- Battery controller software (Jeep 4xe BPCM/HCP, Ford BECM updates) high
- Loose busbar, terminal or sense contact in battery A medium
- Cell with rising internal resistance in battery A low
Symptoms
- MIL on
- Hybrid/EV system or high-voltage battery warning on
- Vehicle may not start (Jeep 4xe)
- Warning comes and goes, fault often stored as intermittent
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B24
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.