OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B23

Hybrid/EV Battery A Voltage

P0B23 is the general fault for the voltage of hybrid/EV battery A, the first of up to four sub-batteries or energy stores (A to D) that the battery controller evaluates separately; which physical unit carries the letter is up to the manufacturer. The code says that the measured voltage of this unit no longer fits the expected value, without the finer split into unstable (P0B24), low (P0B25) or high (P0B26). No manufacturer documents P0B23 publicly; Bentley and Stellantis bulletins only show the specific siblings. GM watches the comparable whole-pack voltage with P0ABB to P0ABD. CARB requires the voltage sensors and cells of the hybrid storage to be monitored, with fault codes that point to the smallest replaceable unit.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 23

Possible causes

  • Weak or failing cells or module in battery A medium
  • Fault in the voltage sense leads or connectors of battery A medium
  • Battery controller software or internal measurement fault low

Symptoms

  • Hybrid/EV system or high-voltage battery warning on
  • MIL on
  • Battery power limited, less electric drive or assist
  • Charging or recuperation restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B23

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication