P0B22
Hybrid/EV Battery Pack Voltage Sense D Circuit Intermittent/Erratic
P0B22 completes the voltage sense D series and reports an intermittent or erratic pack voltage measurement D: the reading jumps, drops out briefly or changes implausibly fast, then recovers. Current code lists title it this way; the older label Generator Phase U Current Sensor Circuit does not belong to this number. No manufacturer documents P0B22 publicly; GM's published tables only cover channel A (P0ABB to P0ABD). CARB requires circuit monitoring of battery voltage sensors in hybrid storage systems. Steady faults of channel D are P0B1E to P0B21, the same fault type on channels B and C is P0B18 and P0B1D. Loose terminals or chafed sense leads are typical, so the warning comes and goes.
Possible causes
- Loose or corroded sense connector or terminal high
- Chafed sense lead with intermittent contact medium
- Controller software misinterprets transients low
Symptoms
- Warning comes and goes, often stored as history
- Battery power limited, reduced electric drive or assist
- Vehicle may not reach Ready or may shut down the high-voltage system
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B22
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.