P0B21
Hybrid/EV Battery Pack Voltage Sense D Circuit High
P0B21 means pack voltage measurement D reports more than its plausible maximum. As with the other high codes, the measurement path is the main suspect, for example a sense lead shorted to a higher potential, a faulty input stage or an evaluation error in software, not an actual overcharged pack. No manufacturer documents P0B21 publicly. For channel A GM's BECM sets P0ABD above 479 V for 1.6 s in 2 s, Type A, and Mercedes-Benz records the channel B variant P0B17 on the eSprinter. CARB requires out-of-range monitoring of battery voltage sensors. The low counterpart is P0B20. High-voltage operation is usually blocked or limited until the fault is cleared.
Possible causes
- Sense lead of channel D shorted to a higher potential high
- Evaluation error in battery controller software medium
- Measurement input of the battery controller defective medium
Symptoms
- MIL and hybrid/EV system warning on
- Vehicle may not reach Ready or may shut down the high-voltage system
- Battery power limited, reduced electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B21
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.