P0B1D
Hybrid/EV Battery Pack Voltage Sense C Circuit Intermittent/Erratic
P0B1D stands for an unsteady pack voltage measurement C: the signal jumps, drops out for moments or changes faster than a real battery voltage can. Because the fault often clears itself, it is frequently found only as a stored code. No manufacturer documents P0B1D publicly; GM's published tables cover only channel A of this measurement (P0ABB to P0ABD). CARB requires circuit monitoring of battery voltage sensors in hybrid storage systems. Permanent faults of channel C are P0B19 to P0B1C, the same fault type on channels B and D is P0B18 and P0B22. Loose terminals, vibration and temperature changes are the usual suspects, so warnings tend to come and go.
Possible causes
- Loose or corroded sense connector or terminal high
- Chafed sense lead with intermittent contact medium
- Controller software misinterprets transients low
Symptoms
- Warning comes and goes, often stored as history
- Battery power limited, reduced electric drive or assist
- Vehicle may not reach Ready or may shut down the high-voltage system
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B1D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.