P0B1C
Hybrid/EV Battery Pack Voltage Sense C Circuit High
P0B1C reports that pack voltage measurement C reads above its plausible upper limit. Usually the measurement path is at fault, for example a sense lead shorted to a higher potential, a defective controller input or a software error in the evaluation, rather than a real overvoltage of the pack. No manufacturer documents P0B1C publicly. GM checks channel A against a 479 V limit on its BECM (P0ABD, Type A, 1.6 s in 2 s), and Mercedes-Benz logs the matching channel B fault P0B17 on the eSprinter. CARB requires out-of-range monitoring of battery voltage sensors. The low counterpart is P0B1B. The controller typically blocks or limits high-voltage operation.
Possible causes
- Sense lead of channel C shorted to a higher potential high
- Evaluation error in battery controller software medium
- Measurement input of the battery controller defective medium
Symptoms
- MIL and hybrid/EV system warning on
- Vehicle may not reach Ready or may shut down the high-voltage system
- Battery power limited, reduced electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B1C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.