OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B1B

Hybrid/EV Battery Pack Voltage Sense C Circuit Low

P0B1B sets when pack voltage measurement C delivers a reading below its plausible lower limit. Typical electrical causes are a sense lead shorted to ground, an open fuse or resistor in the sense path, or a defective controller input. No manufacturer documents this code publicly. GM applies the same idea to channel A, where P0ABC sets below 24 V pack-side voltage for 1.6 s in a 2 s window, Type A. CARB calls for out-of-range monitoring of battery voltage sensors. The high counterpart is P0B1C and the plausibility code P0B1A. A pack voltage reading that is too low can prevent precharge and contactor closing, so the vehicle may not become ready to drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 1B

Possible causes

  • Sense lead of channel C shorted to ground high
  • Fuse or resistor in the sense path open medium
  • Measurement input of the battery controller defective medium

Symptoms

  • Vehicle may not reach Ready or may shut down the high-voltage system
  • MIL and hybrid/EV system warning on
  • Battery power limited, reduced electric drive or assist

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B1B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication