P0B1A
Hybrid/EV Battery Pack Voltage Sense C Circuit Range/Performance
P0B1A flags pack voltage measurement C as in range but not believable. The controller compares it with a reference, usually the sum of the cell voltages or another pack voltage reading, and sets the code when the difference stays too large. No manufacturer documents P0B1A publicly. As an analogue, GM fails P0ABB on channel A once pack voltage and summed cell voltages differ by more than 12 V for 20 of 25 samples, Type A. CARB requires rationality monitoring for battery voltage sensors of hybrid storage systems. Electrical faults of channel C are P0B19, P0B1B and P0B1C. A distorted pack voltage undermines state of charge and cell protection, so power or charging is restricted.
Possible causes
- Drift or calibration error of measurement channel C high
- Cell voltage acquisition faulty, reference sum wrong medium
- Increased resistance at sense terminals medium
- Battery controller software needs an update low
Symptoms
- MIL and hybrid/EV system warning on
- Implausible state-of-charge or range display
- Battery power limited, reduced electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B1A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.