OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B19

Hybrid/EV Battery Pack Voltage Sense C Circuit

Voltage sense C is the third of up to four pack voltage measurements defined in SAE J2012. P0B19 is its general circuit code and sets when the battery controller finds this input electrically unusable, for instance open or without a valid raw value. Which measuring point a manufacturer assigns to C is its own choice. No manufacturer documents P0B19 publicly. GM shows the principle for channel A, checking pack-side voltage against limits and against the summed cell voltages (P0ABB to P0ABD). CARB requires battery voltage sensors of hybrid storage systems to be monitored as input components. The detailed fault types of channel C are P0B1A to P0B1D. High-voltage operation is usually limited.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 19

Possible causes

  • Voltage sense lead C or its fuse open high
  • Sense connector loose or corroded medium
  • Measurement input of the battery controller defective medium

Symptoms

  • MIL and hybrid/EV system warning on
  • Battery power limited, reduced electric drive or assist
  • Vehicle may not reach Ready or may shut down the high-voltage system

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B19

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication