P0B18
Hybrid/EV Battery Pack Voltage Sense B Circuit Intermittent/Erratic
P0B18 reports that pack voltage measurement B jumps or drops out briefly instead of failing steadily. The controller detects implausibly fast changes or short signal losses that disappear again, so the fault often shows up as a history code. No manufacturer documents P0B18 publicly; GM, for example, monitors only channel A in its published tables (P0ABB to P0ABD). CARB requires battery voltage sensors of the hybrid storage system to be monitored for circuit faults. Steady faults of channel B use P0B14 to P0B17. Typical triggers are loose sense connectors or chafed leads that react to vibration and temperature, so symptoms come and go.
Possible causes
- Loose or corroded sense connector high
- Sense lead chafed, intermittent contact medium
- Battery controller software misinterprets transients low
Symptoms
- Warning appears and disappears, often stored as history
- Battery power limited, reduced electric drive or assist
- Vehicle may not reach Ready or may shut down the high-voltage system
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B18
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.