P0B17
Hybrid/EV Battery Pack Voltage Sense B Circuit High
P0B17 means pack voltage measurement B reads above its plausible maximum. Mercedes-Benz uses this exact code on the eSprinter 907: inaccurate BMS measurements can store P0B171C, voltage sensor B in the high-voltage battery module shorted to positive with the value out of range, together with P0ABD00 for sensor A. The result is an intermittent no-start or no Ready status, fixed by a BMS software update. GM checks channel A against 479 V on its BECM (P0ABD, Type A). CARB requires out-of-range monitoring of battery voltage sensors. The low counterpart is P0B16. A real overvoltage is not implied; the measurement itself is suspect.
Possible causes
- BMS measurement inaccuracy, fixed by software update (Mercedes eSprinter) high
- Sense lead of channel B shorted to a higher potential medium
- Measurement input of the battery controller defective low
Symptoms
- Vehicle may not reach Ready or may shut down the high-voltage system
- MIL and hybrid/EV system warning on
- Battery power limited, reduced electric drive or assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B17
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.