OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B16

Hybrid/EV Battery Pack Voltage Sense B Circuit Low

P0B16 sets when pack voltage measurement B reports a value below its plausible minimum, usually an electrical cause such as a sense lead shorted to ground or an open input that pulls the reading down. No manufacturer documents this code publicly. GM uses the same logic on channel A: on its BECM P0ABC sets when the pack-side voltage drops below 24 V for 1.6 s within a 2 s window, Type A, one trip. CARB requires out-of-range monitoring of battery voltage sensors in hybrid storage systems. The opposite fault is P0B17, implausible but in-range values are P0B15. Without a trustworthy pack voltage the controller may refuse to close the contactors or limit operation.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 16

Possible causes

  • Sense lead of channel B shorted to ground high
  • Fuse or resistor in the sense path open medium
  • Measurement input of the battery controller defective medium

Symptoms

  • MIL and hybrid/EV system warning on
  • Vehicle may not reach Ready or may shut down the high-voltage system
  • Battery power limited, reduced electric drive or assist

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B16

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication