OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B15

Hybrid/EV Battery Pack Voltage Sense B Circuit Range/Performance

P0B15 marks pack voltage measurement B as electrically valid but implausible: the value lies within the sensor range yet does not match a reference, typically the sum of the cell voltages or another pack measurement. No manufacturer documents this code publicly. GM shows the principle on channel A: P0ABB fails when pack voltage and summed cell voltages differ by more than 12 V, 20 of 25 samples at 25 ms, Type A, one trip. CARB demands rationality checks for battery voltage sensors of the hybrid storage system. Hard circuit faults of channel B are P0B14, P0B16 and P0B17. Because state of charge and cell protection rely on this value, the controller restricts power or charging.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 15

Possible causes

  • Drift or calibration error of measurement channel B high
  • Faulty cell voltage acquisition distorts the reference sum medium
  • Increased contact resistance at sense terminals medium
  • Battery controller software needs an update low

Symptoms

  • MIL and hybrid/EV system warning on
  • Battery power limited, reduced electric drive or assist
  • Implausible state-of-charge or range display

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B15

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication