P0B12
Hybrid/EV Battery Pack Current Sensor B Circuit Intermittent/Erratic
P0B12 covers a current sensor B signal that jumps or drops out in a way real current cannot, typically from a loose connector, a chafed signal wire or noise on the sensor ground. No manufacturer documents this exact code publicly. GM monitors its sensor B channel with the range limits P0B10 and P0B11 and compares it with sensor A through P0B13, which fails above a 10 A difference in 400 of 500 samples, Type A; an erratic channel often shows up there first. CARB requires circuit and rationality monitoring for hybrid battery inputs. Because the fault comes and goes, the code may be the only trace, but during dropouts the controller can still cut battery power or light a warning.
Possible causes
- Loose connector or poor terminal contact at the current sensor high
- Chafed signal or ground wire medium
- Electrical noise on the sensor ground low
Symptoms
- Intermittent hybrid or EV warning
- Short power reductions during dropouts
- Code stored without lasting symptoms
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B12
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.