OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B10

Hybrid/EV Battery Pack Current Sensor B Circuit Low

P0B10 means the output of current sensor B lies below its valid range. GM uses a dual-range Hall sensor whose channel B covers small currents with high resolution: the 2019 battery energy control module table sets P0B10 when this fine current reads below -24 A (ADC count under 82) for 1.6 s within a 2 s window, Type A, one trip; the 2011 Volt table uses -23 A for 175 ms within 250 ms, one trip. Toyota reports P0B10 for the 2020-25 RAV4 Hybrid when the inverse channel IB1 voltage is excessively low (internal code P0B0E11), one trip, MIL on immediately. A short to ground or a lost sensor supply is typical. The high-side code is P0B11.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 10

Possible causes

  • Sensor B signal line shorted to ground high
  • 5 V supply of the current sensor missing medium
  • Current sensor or junction block with integrated sensor defective medium

Symptoms

  • MIL and hybrid system warning on
  • Battery charge and discharge power limited
  • Engine runs more often, fuel use rises

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B10

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication