OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B0E

Hybrid/EV Battery Pack Current Sensor B Circuit

Many packs measure current with two channels or two sensors so the controller can cross-check them; sensor B is the second channel next to sensor A (P0ABF to P0AC3). P0B0E is its general circuit code. Toyota uses it as the base of internal codes on the 2020-25 RAV4 Hybrid: the sensor sends a voltage rising with current on channel IB0 (sensor A) and an inverse one on IB1 (sensor B). P0B0E11 (IB1 too low) and P0B0E15 (IB1 too high or open) are reported to a generic scan tool as P0B10 and P0B11, one trip, MIL on. GM monitors its fine-range channel B with P0B10, P0B11 and the A/B correlation P0B13. CARB requires circuit monitoring. State of charge then becomes uncertain.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 0E

Possible causes

  • Signal or ground wire of channel B damaged or connector loose high
  • Current sensor or junction block with integrated sensor defective medium
  • Sensor supply voltage faulty low
  • Battery ECU input defective low

Symptoms

  • MIL and hybrid system warning on
  • Battery power limited, less electric assist
  • Implausible state-of-charge display

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B0E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication