P0B0D
Electric/Auxiliary Transmission Fluid Pump Motor Control Module
P0B0D is an internal fault of the module that drives the auxiliary pump motor. GM documents it for the auxiliary transmission pump controller (ATPC) in its 2011 and 2014 hybrid tables and for the 2016 Cadillac ELR: it checks processor integrity, such as SPI hardware faults or a wrong seed and key between processors, with more than 9.5 V supply; 28 failures out of 32 samples in a 6.25 ms loop, detected within about 200 ms, set a Type A fault. Stellantis lists P0B0D-00 on the 2021-25 Jeep Wrangler 4xe and 2022-25 Grand Cherokee 4xe with the 8P75PH plug-in transmission (TSB 21-038-25, revised 21-041-26): MIL and limp mode, sometimes with U0287; the fix is a new in-pan electric pump. U0287 is lost communication with the pump module, P0C23 to P0C25 its circuit.
Possible causes
- Electric pump with integrated control electronics failed (Jeep 4xe 8P75PH) high
- Processor or memory fault inside the pump control module medium
- Supply voltage dips or poor ground at the module low
Symptoms
- MIL on
- Transmission in limp mode
- Possibly lost communication with the pump module (U0287)
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0B0D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.