OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B0C

Electric/Auxiliary Transmission Fluid Pump A Hydraulic Leakage

P0B0C says the circuit fed by auxiliary pump A loses pressure through a leak, so the pump cannot hold the demanded pressure. Stellantis documents it as P0B0C 7A for the 2023-26 Jeep Avenger and 2026 Compass with hybrid dual-clutch transmission outside the US (TSB 21-061-26): an internal leak at the parking pawl locking piston causes jerking and power loss and may stop the engine from restarting after a stop; with P07E4 or P07E6 present and more than 5 km on the clock, the piston or the transmission is replaced. How a controller can see a leak shows a Nidec patent: after a speed change the pump current keeps falling instead of recovering, and the pump is stopped. P0B0B and P0B09 cover the supply, P2797 a pump that does not deliver.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 0C

Possible causes

  • Internal leak at the parking pawl locking piston (Jeep Avenger/Compass hybrid DCT) high
  • Worn seal or valve leaking inside the hydraulic circuit medium
  • External leak and low transmission fluid level medium
  • Internal wear of the auxiliary pump low

Symptoms

  • Jerking and loss of power while driving
  • Engine fails to restart after a stop
  • Transmission warning, possibly with P07E4 or P07E6

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B0C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication